Sale AeroShell Grease 33MS

AeroShell® Greases
Premium military approved greases for the aviation industry Shell offers a complete line of seven aviation greases designed to fill almost every lubrication need of the aviation community. The product line consists of seven products each designed for specific applications. Four of the Shell aviation greases are based on Microgel®, an inorganic thickening agent.

One grease is soap type grease specifically designed to provide the unique lubricant requirements of helicopter main and tail rotor bearings. Two greases are thickened with lithium complex soap and are approved against both Boeing and military specifications.

Main Applications
Whenever an aircraft is certified, all of the lubricants are specified for each application point on the type certificate. The type certificate will specify, either by military specification number or by specific product names, those products which are qualified to be used. The FAA regulations state that only products qualified for specific
applications can be used in certified aircraft. Therefore, in aviation it is the responsibility of the aircraft owner or designated representative to determine which products should be used. Lubricant recommendation charts for specific aircraft should be consulted, or the original airframe manufacturer should be contacted for specific product recommendations.

Advice on applications not covered in this handbook may be obtained from your Shell representative.

AeroShell® Grease 33 is multipurpose airframe grease specifically developed for Boeing to be used in roller bearings, actuator screws and other airframe equipment. It is made with synthetic base oil and a lithium complex thickener, which provides enhanced corrosion resistance and load-carrying capacity. It has a useful temperature range of -100° F (-73° C) to +250° F (+121° C). AeroShell® Grease 33 is qualified under MIL-PRF-23827C (Type I) and Boeing Specification BMS 3-33A.

AeroShell® Grease 33MS comprises AeroShell® Grease 33 fortified with 5% molybdenum disulphide. It possesses the enhanced anti-wear and anti-corrosion properties of AeroShell® Grease 33 with added EP (Extreme Pressure) properties required in highly loaded, sliding applications. It has a useful temperature range of -73º C to +121ºC. AeroShell® Grease 33MS is qualified under MIL-G-21164D.

Protect the Environment
Do not discharge into drains, soil, or water.

next pages ...


 Download MSDS AeroShell Grease 33ms
 AeroShell Products
 HIGH PERFORMANCE GREASES AND HYDRAULIC FLUIDS
BRIEFING NOTE
AeroShell Greases
Left Wheel Bearing and Right Axle
Perfect Partners
Out of AeroShell Grease 17
Modified Left Axle Nut
Fit Left Main Gear Leg
AeroShell Grease 33MS is the newest addition to the lineof

AeroShell Grease 33 is a synthetic multi-purpose airframe grease composed of lithium complex thickened synthetic base oil for enhanced corrosion inhibition and load-carrying ability. AeroShell Grease 33MS is particularly suitable for lubricating heavily loaded sliding applications.

AeroShell Grease 33MS
product
ui

OUR BEST OFFER!

TRAST Aerosupermarket

NCSPB-25150

(20NKBT-25)

$5100
product

SS28300

(12SAM28)

$1450
product

Garmin

GPSMAP 495

Discontinued
product

Garmin

GPS 196

Discontinued
product

Garmin

GPSMAP 695

Discontinued
product

AeroShell

Oil W120

$7.5QT
product

AeroShell

Grease 14

$19KG
product

AeroShell

Grease 5

$15KG
product

Skydrol

LD-4

$22QT
product

Mobil

Jet Oil 254

$13.50QT
product

Mobil

Jet Oil II

$11.95QT
product

BP Turbo

Oil 2197

$13.5QT
product

Exxon

HyJet IV-A

$18QT
product

BP Turbo

Oil 2380

$12QT
product

Aeroshell

Fluid 41

$9LTR
product

AeroShell

Oil W100

$7.5QT
product

Aeroshell

Turbine Oil 750

$15.5LTR
product

Aeroshell

Grease 33MS

$38KG
product

Aeroshell

Grease 22

$32KG
product

Aeroshell

Grease 33

$32KG
product

Aeroshell

Oil 100

$7.5QT
product

Aeroshell

Grease 7

$32KG
product